Let me start by saying this: I’ve been selling storage sheds for over a decade, and the number one mistake new customers make before delivery is skimping on the ground prep. I’ve seen pre-built sheds tilt so far that the door won’t close, I’ve had customers dig out entire foundations because they skipped a simple level check, and I’ve even hauled away shed kits that arrived on a lumpy, muddy spot that turned out to be unworkable in the rain. A storage shed is only as good as its base—and doing it right doesn’t have to mean hiring a crew or breaking the bank. If you’re picking up or waiting on a delivery from my team (or anyone, for that matter), this step-by-step guide is the result of all the missteps I’ve watched customers (and my own team) make over the years. Let’s get it right. Storage Sheds

First, let’s talk about why leveling matters beyond just making your shed look nice. Most of our shed kits—whether the small 8×10 for backyard tools or the larger 12×16 for lawn equipment and a workbench—have pressure-treated floor frames that rest directly on the ground. If that ground slopes more than an inch over 10 feet (that’s the rule of thumb we live by), the floor frame will twist. Twist means uneven door gaps, which let in moisture and pests. Over time, that twisted frame can warp the shed’s walls or roof, turning a 10-minute assembly into a weekend of repairs. I once had a customer call me six months after installing their shed, saying the roof was leaking every time it rained. Turns out they had a 3-inch slope across their 12-foot side—enough to make the front wall sit lower, catch rainwater, and rot the wall panel. We fixed it for them, but I told them: next time, prep the ground first, and you’ll avoid half the headache.
Now, let’s break this down into the actual steps, no fancy jargon, just what I teach my team when we walk a customer’s property to help them mark their shed spot.
Step 1: Pick the right spot (before you even grab a shovel)
This is half the battle, and it’s the step most people rush. First, make sure the spot is flat relative to the rest of your yard—no one wants a shed that looks like it’s sliding down a hill. But also, avoid low-lying areas. I don’t care how level the ground is there, if it floods when it rains, your shed will end up with a puddle under it, and that’s a recipe for rust, mold, and rotted wood. If your only flat spot is near a downspout or at the bottom of a slope, you’re going to have to add drainage, which we’ll cover later. Also, check for underground utilities—gas, electric, water, sewer. A quick call to your local utilities company is free, and it takes 24 hours. I can’t tell you how many times a customer has dug 2 feet down and hit a gas line. Don’t be that person. While you’re at it, make sure the spot is at least a foot away from fences, trees, or your house. Roots can grow under the ground and push it up over time, and tree branches can scratch your shed’s exterior. Trust me, I’ve replaced three shed doors in the last two years because of overhanging oak branches.
Step 2: Measure and clear the space
Once you’ve marked the spot for your shed, add 2 feet to each side. Why? Because you need room to work when assembling the shed, and later, room to trim grass or pull weeds around the base. Grab a tape measure and mark the corners with stakes or spray paint (not just a stick—you’ll forget where it is by the end of the day). Now clear all the grass, weeds, rocks, and debris. This is non-negotiable. A small rock under the shed can throw off the entire level. I always tell customers to dig down 2 to 3 inches in the marked area, not just scrape the grass. Roots and small weed stems will grow through a thin layer of soil and push up the shed over time. If you have a lot of large rocks, you can pull them or break them up with a sledgehammer, but don’t leave any bigger than a baseball in the area.
Step 3: Get the ground level—don’t skip the tools
You don’t need a fancy laser level (though they work great if you have one), but you do need two things: a long level (at least 4 feet long—short levels lie) and a tape measure, plus a rake and a tamper (a flat, heavy tool to pack soil down). Here’s how I do it:
- Start at one corner. Put the level on the ground, and fill in or dig out soil until the bubble is dead center.
- Move the level 4 feet along the length of your shed. If the bubble tilts up, that end is higher—dig out a little soil. If it tilts down, that end is lower—add a small amount of soil (no more than a half-inch at a time).
- Repeat this across the entire marked area, checking every 4 feet. For a 10×12 shed, that’s 120 square feet, but it only takes 20 minutes if you’re consistent.
- Once the entire area is roughly level, use the tamper to pack the soil down tight. This is key because loose soil will settle over time, leaving a dip in the ground. Tamp in straight lines, overlapping each pass so you don’t miss spots. I always tamp twice: once after grading, once more after a quick check with the level to make sure nothing shifted.
Wait, what if your ground has a steeper slope? Like, 5 to 10 degrees? Don’t panic—you can either build a small retaining wall or use gravel pads. For slopes less than 2 inches over 10 feet, you can usually grade it by hand, but for steeper slopes, I recommend using pre-made concrete blocks or gravel. Gravel is my go-to for most customers because it’s cheaper and drains better. Here’s how to do that: once you’ve cleared the area, lay down a landscape fabric to keep weeds from growing up through the gravel. Then add 3 to 4 inches of crushed stone (1/2 to 1 inch size works best) and tamp it down. This creates a stable, level base that won’t hold water, which is perfect for areas that drain poorly. Concrete blocks work if you want a more permanent base—just make sure they’re level with your long level, and leave space between blocks for drainage.
Step 4: Fix drainage if you have a wet spot
If your shed spot is near a downspout or floods after rain, leveling alone isn’t enough. The worst thing you can do is build a level base in a spot that collects water. I’ve had customers do this, and within a month, their shed’s floor was sitting in a puddle. Here’s how to fix it: if it’s a small low spot, add a layer of gravel as I mentioned before, sloping slightly away from the shed (1 to 2 degrees is enough—you don’t want it to look like a race track). If it’s a bigger drainage issue, dig a small French drain along the low side of the spot, fill it with gravel, and run it away from your house or other structures. Another trick: grade the entire area so it slopes away from the shed by 1/8 inch per foot. That’s barely noticeable, but it’s enough to make water run off instead of pooling. I always remind customers: water is your shed’s enemy. Don’t give it a place to sit.
Now, let’s talk about common mistakes I see every single week. First, using a short level. A 2-foot level can make a 1-inch high spot look level if you’re not paying attention. I had a customer last month who used a 1-foot level and ended up with a shed that was 2 inches higher on one end. By the time he called, the door was scraping the floor, and he had to take the entire shed apart to fix it. Second, not tamping the soil. Loose soil settles, and before you know it, your shed has a lean. Third, leaving large rocks or roots under the ground. I once had a root push up a section of a shed floor so much that a shelf of gardening tools fell through. It was a $500 mistake that could have been avoided by digging down an extra inch. Fourth, not checking for utilities. A friend of mine was digging a shed base and hit an electric line, cutting power to half the neighborhood for two hours. He had to pay a fine and fix the line—all because he skipped the free utility check. I can’t stress that enough.
Once you’ve finished prepping the base, give it one last check with your long level before the shed is delivered or you start assembling. If you’re working with our team, we always do a quick walkthrough before dropping off the shed kit to make sure the base is ready. If it’s not, we’ll pause and help you get it right, instead of leaving you with a half-assembled shed that doesn’t fit. We’ve been in this business long enough to know that a little prep time saves everyone time and frustration down the line.
I know what some of you are thinking: “This seems like a lot of work. Can’t I just pay someone to do it?” Sure, you can hire a landscaper or a handyman, but it’s not that hard, and it’s cheaper to do it yourself if you’re comfortable with basic tools. The total cost for a few bags of soil, gravel, landscape fabric, and a tamper is way less than paying someone, and you’ll have the satisfaction of knowing your shed’s base is done right. If you’re not comfortable doing it, though, we work with local contractors who specialize in shed prep, and we can put you in touch with them—no pressure, just a recommendation from a team that’s been in the area for years.
At the end of the day, a storage shed is an investment. Whether you’re storing lawn equipment, holiday decor, or using it as a workshop, you want it to last. The time you spend leveling the ground is the foundation of that longevity. I’ve sold thousands of sheds, and the ones that give customers the least trouble are the ones where the ground was prepped properly. The ones that need constant repairs? Almost always the ones that were set on unlevel ground or muddy spots.

If you’re ready to get your shed project started, whether you’re picking up a kit or ordering a pre-built unit, we’re here to help. We can walk you through every step, answer any questions about ground prep, and make sure you end up with a shed that stands the test of time. Don’t settle for a flimsy base—let’s get your shed on the right foundation from the start. Reach out to us to discuss your shed needs, plan your delivery, and get all the tips to make your project go smoothly.
Sheds References:
- American Wood Council. (2020). Residential Shed Construction and Maintenance Guidelines.
- National Association of Home Builders. (2019). Site Preparation for Outdoor Structures.
- U.S. Department of Agriculture. (2018). Backyard Storage Sheds: Site Selection and Foundation Basics.
- International Code Council. (2021). Residential Code Requirements for Small Accessory Structures.
MBA Building Solutions Pty Ltd
MBA Building Solutions Pty Ltd is one of the most professional storage sheds suppliers and builders in Australia. We are committed to providing customized building solutions for residential, commercial, industrial and agricultural applications. Welcome to buy durable storage sheds at competitive price here! Also, quotation is available.
Address: 32 Leonard Crescent, Brendale QLD 4500
E-mail: tenders@mbabuildings.com
WebSite: https://www.mbabs.com.au/