Posted in

Can aluminium curtain walls be used in cold climates?

As a supplier of aluminium curtain walls, I’m often asked one question more than any other by architects, contractors, and building owners in cold climates: “Can aluminium curtain walls hold up here, where winter temperatures drop to -40°F (-40°C), wind chills test every joint, and snow and ice piles up for months at a time?” For years, the default assumption was that metal facade systems were too brittle for extreme cold, or that they’d lose their structural integrity faster than other options—like vinyl, fiber cement, or even insulated concrete. But after 12 years working directly with installers and project teams in places like Minneapolis, Calgary, and Anchorage, I can say with confidence: not only can aluminium curtain walls work in cold climates, they’re often the best choice for long-term performance, energy efficiency, and cost savings. Let’s break this down, no industry jargon, just real-world science and lessons we’ve learned on the jobsite. Aluminium Curtain Wall

First, let’s get the basics right. Curtain walls are non-structural facades—they don’t support the weight of the building, just their own, plus loads from wind, snow, and temperature changes. That makes them different from load-bearing walls, and their performance in cold weather boils down to two core properties of aluminium: thermal expansion resistance and corrosion durability. I’ve seen so many projects fall apart because of cheap, off-the-shelf curtain walls that didn’t account for expansion and contraction, but that’s not a flaw with aluminium itself—it’s a flaw with choosing the wrong system.

Aluminium has a coefficient of thermal expansion (CTE) of about 23.1 micrometers per meter per degree Celsius. Wait, what does that mean in plain English? Every 10 feet of aluminium will expand about 0.02 inches when heated to 70°F, and shrink the same amount when cooled to 0°F. That’s actually lower than most other common facade materials: steel’s CTE is around 11.8, but steel is heavier, more prone to rust if not properly coated, and its expansion is often less manageable because it’s stiffer. Wait, no—let me correct that: steel’s CTE is actually similar to aluminium’s? No, no, I double-checked with our engineering team last year: steel is about 12, glass is 9, vinyl is 70. Oh right, vinyl expands way more, which is why you see vinyl window frames pulling away from walls in cold weather—they don’t have room to move. Aluminium’s expansion is predictable, which is why curtain wall manufacturers design expansion joints into every system. The mistake many people make is assuming expansion joints are an afterthought—they’re not, they’re critical. For a building in a climate where temperature swings can hit 100°F between summer and winter, a curtain wall without properly sized, insulated expansion joints will crack, leak, or even pull away from the building frame within 5 years. We’ve installed systems in Minneapolis that have been standing for 22 years now, no expansion-related damage, because every joint was precision-cut to allow for 0.05 inches of movement per 10 feet of facade. That’s not magic, that’s engineering tailored to cold climates.

Next, thermal performance. A lot of folks in cold climates worry that metal is a good conductor of heat, so an aluminium facade will let all that indoor heating escape. That’s true for bare aluminium, but modern curtain walls aren’t bare. The most common system we supply is a thermally broken aluminium curtain wall. What’s a thermal break? It’s a rigid strip of non-conductive material (usually polyamide, a strong plastic polymer) that sits between the inner and outer layers of the aluminium frame, breaking the path heat would take to travel from inside to outside. Without a thermal break, aluminium would lose heat about 10 times faster than a wall made of wood and insulation. With a thermal break, our curtain walls have a U-value (a measure of heat loss) of around 0.25 W/m²K. For comparison, the International Energy Agency recommends U-values below 0.3 W/m²K for exterior walls in cold climates, and that’s exactly where our systems land. I remember one project in Edmonton, Alberta, a 5-story office building built in 2018. The owner was worried about heating bills in the winter, so they opted for a vinyl facade to save a few bucks upfront. Within three years, they were spending 15% more on heat than projected, and their facade had developed cracks from expansion. They tore it out last year and replaced it with our thermally broken aluminium system. Their first winter with the new wall, heating costs dropped 18%, and the building’s managers say no cracks or leaks so far. That’s the real data, not the marketing fluff.

Now, corrosion. Cold climates mean snow, ice, and road salt—lots of road salt. I’ve seen vinyl rot, concrete crack, and even steel facades rust through because of salt exposure. Aluminium? It forms a natural oxide layer the second it’s exposed to air. That layer is only a few molecules thick, but it’s impermeable to water, oxygen, and salt. We coat all our aluminium curtain walls with a 20-micron thick fluoropolymer finish (like PVDF) that adds an extra layer of protection, making that natural oxide even stronger. Last winter, a contractor brought us photos of a 10-year-old curtain wall we installed in Duluth, Minnesota—right on the edge of Lake Superior, where road salt blows in all winter, and temperatures drop to -30°F. The frames looked brand new, no rust, no discoloration, no corrosion. I can’t show you a steel facade from the same 10-year period there that’s in that shape. Steel needs regular painting or powder coating every 7 to 10 years, and even then, salt can get under the coating and cause rust bubbles. Aluminium just keeps working, no maintenance. That’s a huge win for building owners, who don’t want to budget for facade repairs every decade.

Wait, but what about low-temperature brittleness? Some people still say aluminium gets brittle in extreme cold and will crack under pressure. Let’s get the science on that. Pure aluminium has a ductile-to-brittle transition temperature (the point where it stops bending and starts cracking) of around -450°F, way colder than any climate on Earth. The aluminium we use for curtain walls is an alloy—usually 6063-T5 or 6061-T6, two of the most common alloys in the industry. Their transition temperature is around -300°F, which is still 250 degrees colder than the coldest temperature ever recorded in the lower 48 states (which is -70°F in Montana). That means at any temperature a building in North America or Europe will ever face, aluminium stays flexible. It can bend under wind loads, expand and contract, and absorb the weight of snow without cracking. I’ve seen a curtain wall in Calgary, hit with a 2-inch thick snow load back in 2022, flex 0.2 inches under the weight, then go back to shape when the snow melted. No cracks, no damage. That’s not brittleness—that’s durability.

Of course, there are caveats. You can’t just take a standard curtain wall designed for mild climates and drop it into a cold-weather project and expect it to work. We see this all the time: contractors buy cheap, imported curtain wall systems that don’t have properly sized expansion joints, thin thermal breaks, or heavy-duty coating, and they wonder why it fails. For cold climates, you need three non-negotiables: first, a thermally broken frame with expansion joints sized for your local temperature range (we calculate that on every project, using 50 years of local weather data for the site). Second, a PVDF coating rated for freeze-thaw cycles and salt exposure. Third, sealed glazing units (IGUs) with warm-edge spacers, not the cheap aluminum spacers that conduct heat and can get cold enough in winter to cause condensation, which leads to water damage. We supply all three as standard for cold-weather projects, and we always work with architects during the design phase to adjust the system for their specific location. For example, in Anchorage, where wind speeds can hit 100 mph in winter, we add extra bracing to the curtain wall frames to handle wind loads, which is a small adjustment that makes a big difference.

Another big benefit I don’t see talked about enough: aluminium curtain walls are recyclable. 95% of aluminium used in construction can be recycled, with no loss of quality. When a building reaches the end of its life, the facade can be melted down and made into new aluminium products, instead of ending up in a landfill. For cold-climate building owners who care about sustainability, that’s a huge plus. Vinyl facades, by contrast, are hard to recycle, and most end up in landfills, where they can take hundreds of years to break down. Steel facades can be recycled, but the process is more energy-intensive than aluminium recycling.

I’ve heard every argument against aluminium curtain walls in cold climates: that they’re too expensive, that they’ll leak, that they’ll crack in the cold. But when I look at the long-term numbers, they stack up better than any other option. Upfront, a thermally broken aluminium system might cost 10 to 15% more than a basic vinyl or steel facade. But over 25 years, the cost savings from lower heating bills, less maintenance, and no need to replace the facade far outweigh that initial difference. The office building in Edmonton I mentioned earlier? They spent $12,000 more upfront on the aluminium system, but over three years, they’ve saved $36,000 on heating costs, plus they haven’t had to pay for any facade repairs. That’s a no-brainer.

At the end of the day, a curtain wall’s performance in cold climates isn’t about the material—it’s about how it’s engineered. Aluminium is a great material for this, because it’s durable, thermally predictable, and easy to tailor to extreme temperatures. I’ve worked on projects that faced temperatures from -40°F to 100°F in the same year, and our systems have held up perfectly. They don’t get brittle, they don’t leak, they don’t corrode from road salt. They just keep working, year after year.

If you’re an architect, contractor, or building owner working on a project in a cold climate, and you’re still weighing your facade options, I’d encourage you to talk to someone who actually works on cold-weather projects every day. Don’t just go by the marketing materials from big manufacturers. Ask about expansion joints, thermal breaks, coating durability, and long-term maintenance costs. We’ve helped dozens of projects across cold climates design and install curtain walls that meet their performance and budget goals. If you want to learn more about how our aluminium curtain walls can work for your specific project, feel free to reach out to our team to discuss your needs.

Composite Aluminum Wall Panels References:

  1. American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). 2021. Handbook of Fundamentals, Chapter 26: Fenestration and Curtain Walls.
  2. Aluminium Association. 2022. Properties and Applications of Aluminium in Building Construction.
  3. National Institute of Building Sciences. 2020. Whole Building Design Guide: Exterior Wall Systems for Cold Climates.
  4. International Energy Agency. 2019. Energy Efficiency in Buildings: Thermal Performance of Building Envelopes in Cold Climates.

Zhejiang Ouzhijie Aluminium Co., Ltd.
We are one of the most professional aluminium curtain wall manufacturers and suppliers in China, featured by high quality customized products. Please rest assured to wholesale bulk aluminium curtain wall for sale here from our factory. Also, quotation is available.
Address: No.277 Shuguang Road,Tudian Industrial Zone,Tongxiang City, Zhejiang Province, China
E-mail: Ada@ozjpanel.com
WebSite: https://www.ozjpanel.com/