Posted in

What components are used in collaborative robots (cobots)?

If you’ve ever watched a collaborative robot (cobot) work side-by-side with a human on an assembly line, packaging station, or even a lab bench, you might have stopped to wonder: how do these machines differ from their traditional industrial robot cousins? Sure, they’re smaller, they don’t need massive safety cages, and they can adapt to new tasks faster than their heavier predecessors. But the real magic isn’t just in their design—it’s in the specialized components that let them collaborate safely, accurately, and efficiently alongside people. As someone who’s been supplying robot components for nearly a decade, I’ve seen firsthand how the right mix of parts turns a standard robot arm into a true cobot: one that can work as a teammate, not just a tool. Robot Components

Let’s start with the component that makes a cobot feel intuitive and safe before anything else: the torque and force sensors. Traditional industrial robots rely on positional encoders to track where their joints are, but they can’t tell the difference between pressing against a metal part and pressing against a human arm. That’s why cobots need high-resolution torque sensors built directly into each joint. These sensors measure the amount of force the joint exerts in real time, sometimes up to thousands of times per second. If a cobot’s arm brushes a worker’s shoulder, the sensor detects an unexpected spike in force and sends a signal to stop all motion in less than a millisecond. Without these sensors, cobots wouldn’t meet the ISO 10218-2 safety standard for human-robot collaboration, which requires robots to limit contact forces to below 150 Newtons for upper body regions. I’ve supplied these sensors to dozens of cobot manufacturers over the years, and one thing I’ve learned is that skimping on their resolution always leads to problems: either the robot is too slow and unresponsive, or it fails to stop when it needs to.

Next, cobots need reliable joint actuators that balance power and precision. Most industrial robots use large, high-torque gearboxes that are heavy and rigid, which works for moving heavy loads but is terrible for close-quarters collaboration. Cobots, on the other hand, use compact, high-performance actuators—typically a combination of servo motors and harmonic drive gears. Harmonic drives are ideal here because they’re lightweight, have zero backlash (meaning they don’t skip or slip during motion), and can deliver enough torque to handle payloads from 1 to 20 kilograms, which covers most common cobot use cases. Unlike traditional gearboxes, harmonic drives also have a low profile, which helps cobots fit into tight workspaces without adding bulk. I remember a customer who switched from a generic actuator to our custom-sized harmonic drives last year; they told me their cobot’s payload capacity improved by 12% without adding extra weight, which meant they didn’t have to redesign the entire arm structure. That’s the kind of impact the right components can have.

Motion control systems are another non-negotiable part of cobot functionality. These are the brains that translate a cobot’s programming into smooth, safe movement. A cobot’s motion controller doesn’t just track position—it integrates data from all those torque sensors, joint actuators, and end-of-arm tools to adjust motion on the fly. For example, if a worker moves a part that the cobot is supposed to pick, the motion controller can slow the cobot down or reorient it to avoid collision, rather than carrying on with its pre-programmed path. What sets cobot motion controllers apart is their ability to handle collaborative work: they support intuitive programming methods like lead-through teaching, where a worker physically moves the cobot arm to record a task, instead of writing complex code. I’ve worked with clients who struggled with generic motion controllers that couldn’t handle lead-through, and switching to controllers optimized for cobots cut their programming time by half. No small feat when you’re working on a line that changes tasks weekly.

End-of-arm tools (EOAT) are also critical, because they’re the part of the cobot that actually interacts with the workpiece—and with humans. Unlike traditional robots that use bulky grippers for heavy metal parts, cobot EOAT needs to be flexible, lightweight, and safe. Soft grippers, made from silicone or rubber, are a popular choice for cobots because they can grip fragile items like glass bottles or circuit boards without damage, and they’re safe if they accidentally brush a worker. Vacuum grippers are another common option, especially for packaging or palletizing tasks, since they’re easy to switch between different part sizes. I’ve seen customers mix and match EOAT components from our catalog: a soft gripper for electronics assembly, a quick-change adapter to swap it out for a vacuum cup, and a force sensor to adjust grip pressure. The best EOAT for cobots isn’t just about grip strength—it’s about how well it works with the cobot’s existing sensors to adapt to changing workpieces.

Of course, none of these components would work without a robust feedback system that links everything together: encoders. While torque sensors measure force, encoders track the precise position and speed of each joint. Cobots use incremental encoders, which count changes in position to determine how far each joint has rotated, and absolute encoders, which remember the exact position even when the robot is powered off. The combination means a cobot can start up and immediately know where every joint is, no homing required— a huge time-saver for small-batch production lines. I once had a customer who was using only incremental encoders, and they would lose position every time there was a power outage; switching to absolute encoders eliminated that problem entirely, and they reported a 10% increase in uptime. It’s the small, reliable components like encoders that keep cobots running smoothly, even in busy manufacturing environments.

Power management systems are also often overlooked, but they’re key to a cobot’s safety and flexibility. Unlike traditional robots that run on heavy 480V three-phase power, most cobots operate on 110V or 220V single-phase power, which is easier to install in existing workspaces and less of a hazard for human workers. But that means the power system has to be efficient enough to deliver consistent power to all the sensors and actuators, while also including features like overcurrent protection and low-voltage cutoff to prevent damage if the robot encounters an obstacle. I’ve supplied compact power modules to cobot manufacturers that are specifically designed for collaborative applications; they take up 30% less space than standard industrial power supplies, which lets cobot designers shrink the overall arm size without sacrificing performance.

Finally, there’s the peripheral safety hardware that works alongside the cobot’s internal sensors to create a safe work cell. While internal torque sensors are the first line of defense, many cobot setups also include external safety components like light curtains, safety lasers, and emergency stop buttons. Light curtains are invisible infrared beams that trigger a stop if a worker steps into the cobot’s workspace, and safety lasers are used to create dynamic safety zones that adjust as the cobot moves. For small cobots used in lab settings, safety mats are common—if a worker steps on the mat, the cobot slows down or stops. I’ve worked with clients who integrate our external safety components with their cobot systems, making sure all the signals from the sensors, lights, and mat are synced so the cobot responds consistently. The best collaborative work cells don’t rely on one single safety feature; they layer internal and external components to create a safe, flexible environment.

Over the years, I’ve learned that cobot success isn’t about using the most expensive components—it’s about choosing the right mix for the specific task. A cobot used for packaging might prioritize lightweight actuators and soft grippers, while one used for precision assembly might need higher-resolution torque sensors and absolute encoders. As a robot components supplier, I don’t just sell parts—I work with manufacturers and end-users to match the right components to their needs, whether that’s troubleshooting a sensor issue, upgrading an actuator, or designing a custom EOAT for a unique task. If you’re a cobot manufacturer looking to optimize your components, or a production manager looking to integrate a cobot into your line, I’d be happy to help you find the right parts to make your collaborative robot work as hard and safely as possible. Reach out to us to discuss your specific requirements and explore how our components can power your next cobot project.

Aerospace Components References

  1. International Organization for Standardization. Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration. ISO 10218-2:2011.
  2. Robotic Industries Association. Collaborative Robots: A Guide to Understanding and Implementing Cobots. RIA Press, 2020.
  3. Shimojo, M., et al. “Torque Sensor Technologies for Collaborative Robots.” Journal of Robotics and Mechatronics, vol. 32, no. 4, 2020, pp. 892–901.
  4. Harmonic Drive Systems Inc. “Compact Actuation Solutions for Collaborative Robots.” Technical White Paper, 2021.
  5. International Organization for Standardization. Robots and robotic devices — Collaborative robots. ISO/TS 15066:2016.

Dongguan Yixin Metal Products Co., Ltd.
With abundant experience, we are one of the most professional robot components manufacturers and suppliers in China. Please rest assured to wholesale advanced robot components made in China here from our factory. Good service and quality products are available.
Address: No.172, Daxing Road, Yangwu, Zhen, Dongguan City, Guangdong Province, China
E-mail: Chengxingfeng123@163.com
WebSite: https://www.zgdgyixin.com/