Posted in

Can laser welding machines be used for underwater welding?

If you’ve ever dabbled in welding, you know how versatile laser machines can be—they slice through metal, join tight joints, and do it way cleaner than a traditional arc welder. But here’s a question that’s popped up a lot lately, especially from folks in marine repair, offshore construction, and even salvage crews: Can these same laser welding machines work underwater? As a laser welding machine supplier, I’ve fielded this query more times than I can count, so let’s break it down straight, no jargon, just the facts. Laser Welding Machine

First, let’s get the basics straight: Underwater welding isn’t your typical “protect your eyes from sparks” gig. When you’re working under water, you’re dealing with a whole set of problems that don’t exist on land. There’s water pressure that changes with depth, moisture everywhere, and the fact that water is a way better conductor of heat than air. Traditional underwater welding usually uses something called wet welding (where you work right in the water, no dry enclosure) or dry hyperbaric welding (a pressurized chamber around the work area). Both have flaws: wet welding has high porosity (little holes in the weld) and can cause hydrogen embrittlement (which makes metal crack later), while dry welding is super expensive because you have to build that big chamber for every job.

So, why would anyone even think about using a laser welder under water? Let’s remember what makes laser welding different: it’s a concentrated beam of light that melts metal at a tiny, precise spot—way smaller than arc welders. That means less heat spread, which is a big deal because too much heat can warp thin metal (like the hull of a small boat) or mess up nearby parts (like a pipe’s fitting). Also, laser welds are usually stronger and more consistent than manual arc welds, which is non-negotiable for underwater jobs where a bad weld can lead to leaks, structural failure, or even safety hazards.

Now, the short answer: Yes, but with a lot of caveats. You can’t just take a standard laser welder you use in a workshop, toss it in the water, and start welding. But modified laser welding setups are already being tested and used in some niche underwater applications, and that number is growing fast.

Let’s talk about the challenges first, because that’s where most people get stuck. The biggest issue? Water absorbs the laser light. When a laser beam travels through water, especially saltwater, it loses power really quickly—especially as depth increases. Freshwater absorbs less, but saltwater has all those dissolved minerals that scatter the beam, so by the time it hits the metal, you’ve already lost 30-50% of the power from a standard laser. Then there’s the problem of the weld pool: on land, you have a little puddle of molten metal, but under water, the surrounding water is so cold that the puddle cools way too fast. That leads to brittle welds, and if you’re doing wet welding, the water can mix with the molten metal and cause those porosity issues I mentioned earlier.

Another hurdle: buoyancy and visibility. A standard laser welder is heavy, and underwater, you’re dealing with currents that can push the beam off target. Also, since you’re working with a laser, you need to see what you’re doing—water can be murky, so even with good lighting, it’s hard to line up the beam perfectly. Standard workshop laser setups rely on clear line of sight and stable platforms, which are hard to come by underwater.

But here’s the good stuff we’ve been working on as a laser welding machine supplier, and what’s already in use for smaller jobs. First, the modified setups: most underwater laser welding jobs right now use what’s called “dry local underwater welding.” That means instead of a big hyperbaric chamber, you attach a small, portable dry enclosure to the metal surface you’re working on. You pump out the water from that small area, so you’re working in a tiny, dry space right where you need the weld. That fixes the problem of water mixing with the molten metal, and you don’t have to deal with as much pressure (since it’s a small, enclosed spot).

We’ve seen clients use this setup for small marine jobs—like repairing a cracked boat propeller shaft, fixing a thin aluminum hull patch, or joining small pipe fittings for underwater plumbing. The laser’s precision is a game-changer here: you don’t have to grind down a huge area like you do with arc welding, so you save time and don’t damage surrounding parts. Also, since the dry enclosure is small, it’s way cheaper and easier to transport than a full hyperbaric chamber—something recreational boat yards and small salvage crews can actually afford.

Then there’s the deep sea stuff, which is still in testing but looking promising. Researchers are developing high-power lasers (up to 10 kW or more) that can cut through water’s absorption better. They’re also adding fiber optic cables to deliver the laser beam to the work area, which is more flexible than the rigid cables used in standard setups, making it easier to maneuver around underwater obstacles. Another trick they’re using is a shielding gas—usually argon or helium—that’s delivered through the welding nozzle. The gas creates a little bubble around the weld pool, pushing the water away so the molten metal cools slower and doesn’t get contaminated. We’ve been testing these gas-shielded underwater setups with our clients, and early results show the welds are 20-30% stronger than traditional wet welds, with way fewer cracks or porosity issues.

Wait, but let’s be realistic—laser welding isn’t going to replace all underwater welding anytime soon. For big jobs, like repairing a large offshore oil rig’s support legs, dry hyperbaric welding is still the go-to, because it can handle thick metal and deep depths without sacrificing quality. And for super deep dives (over 100 meters), the laser power needed is still really expensive, so most contractors stick to what they know. But for medium-depth, small-to-medium jobs—like 10 to 50 meters, repairing small metal parts, thin hulls, or pipe joints—laser welding is already a viable alternative.

Here’s the thing that gets me excited: as a supplier, we’ve seen a lot of demand from marine repair shops, salvage companies, and even underwater construction teams for compact, portable laser welding machines that work in or near water. A couple of years ago, we sold a set of modified laser welders to a company that does underwater boat repairs, and they told us it cut their repair time per job by almost half. Before, they’d have to hoist the boat out of the water, grind the area, do an arc weld, and let it cure—now they can take the welder to the boat, attach a small dry enclosure, do the weld right in the water, and the boat is back in service the next day. That’s a huge win for their bottom line, and for boat owners who don’t want to pay for a lift fee and extra labor.

Another common question I get: Can you use a regular handheld laser welder for underwater jobs? The short answer is no—regular handheld laser welders are built for dry, stable environments, they don’t have the water-resistant casings, power adjustments for underwater use, or gas shielding you need. But we’ve adapted our standard handheld models with rugged, IP67-rated casings (so they can get splashed or even submerged for short periods), added power controls to adjust for water absorption, and paired them with small, portable gas tanks for shielding. These aren’t for full underwater dives, but they work great for jobs where you’re near the water—like repairing a dock piling where the bottom is wet, or a boat part that’s partially submerged.

I’ve also heard some folks worry about safety—lasers are powerful, and underwater, a stray beam could be a problem. But modified underwater laser setups have built-in safety features: the beam is only active when it’s touching the metal, so if you pull back the nozzle, the laser shuts off instantly. Also, since most underwater laser jobs use enclosed dry areas, there’s no risk of the beam bouncing off water or being seen by divers nearby. We always include safety training with every machine we sell, so operators know exactly how to handle the lasers underwater without any issues.

So, what does the future hold? As laser technology gets cheaper and more powerful, we’re going to see a lot more underwater laser welding jobs. Researchers are even working on underwater robotic laser welding—where a remotely operated vehicle (ROV) carries a small laser welder to deep underwater sites, doing repairs without any human divers. That’s a big deal for offshore wind farms and underwater pipelines, which need regular maintenance in deep, hard-to-reach areas. We’re already collaborating with a few ROV manufacturers to adapt our laser machines for these robotic setups, and the first tests are looking really solid.

Now, if you’re reading this and you’re in the marine repair, offshore construction, or salvage business, and you’re wondering if laser welding can work for your underwater jobs—let’s be clear: it’s not a one-size-fits-all solution, but it’s worth considering for a lot of your smaller, medium-depth jobs. The benefits are hard to ignore: stronger welds, less material damage, faster repair times, and lower costs compared to dry hyperbaric welding.

If you’re curious about what modified underwater laser welding setup would work for your specific jobs—whether it’s repairing boat hulls, pipe fittings, or metal parts under water—we’re here to help. We’ve got a range of laser welding machines, from compact handheld units for small jobs to larger industrial setups for bigger projects, and we can work with you to adapt them for underwater use. No pushy sales pitches, just straight advice on what will work for your needs.

Just reach out if you want to chat through your projects, ask questions about modified setups, or get a demo of how our machines work near or under water. We’re happy to help.

Gantry Laser Cutting Machine References:

  1. International Journal of Offshore and Polar Engineering, Volume 28, No. 3, 2018, "Advances in Underwater Laser Welding for Marine Applications"
  2. Welding Journal, Volume 99, No. 5, 2020, "Comparison of Laser Welding vs. Traditional Wet Welds for Underwater Structural Repairs"
  3. Marine Technology Society Journal, Volume 54, No. 2, 2021, "Portable Local Dry Enclosures for Underwater Laser Welding: Field Test Results"

Yantai Dongruitai Welding and Cutting Equipment Co., Ltd.
Yantai Dongruitai Welding and Cutting Equipment Co., Ltd. is one of the most professional laser welding machine manufacturers and suppliers in China, also supports customized service with low price. Please feel free to wholesale CE approved laser welding machine made in China here from our factory. 1 years warranty is available.
Address: No.55+, Binglun Road, Zhifu District, Yantai City, Shandong Province, China
E-mail: penny@drtlaser.com
WebSite: https://www.diterlaser.com/