Posted in

what are the best aluminum alloys for casting and machining

If you’re in the aluminum casting and machining space—whether you’re a aerospace engineer designing a new bracket, a automotive part manager sourcing production components, or a industrial equipment builder looking for durable, cost-effective parts—you know there’s no one-size-fits-all alloy. After 12 years running my aluminum casting and machining shop, I’ve seen firsthand how choosing the wrong alloy can turn a tight deadline into a production nightmare: parts that crack during machining, corrode in harsh environments, or fail stress tests before they even make it to the assembly line. Today, I want to break down the alloys that work best for both casting (pouring molten metal into a mold to form near-net-shape parts) and machining (cutting, drilling, or finishing those cast parts to tight tolerances), and share why each has a place in our shop—and yours. Aluminum Casting Machining

First, let’s get one thing straight: casting aluminum and machining aluminum aren’t the same. A great casting alloy needs to flow smoothly into intricate mold cavities, have low shrinkage (so it doesn’t warp as it cools), and resist defects like porosity. A great machining alloy needs to have consistent hardness, chip well without gumming up tools, and hold tight tolerances without breaking or deforming during cutting. Some alloys check both boxes perfectly, while others excel at one but fail the other. That’s why my team and I test every incoming alloy for both castability and machinability before we put it to work for a customer.

Let’s start with the alloys that are our go-tos for everyday, high-volume parts: 356 Aluminum. This is the workhorse of aluminum casting, and for good reason. It’s a hypoeutectic silicon-aluminum alloy, which means it has a balanced amount of silicon (around 7%) that gives it excellent fluidity when molten. When we pour 356 into a sand mold, permanent mold, or even die cast, it fills even tiny, complex features without leaving gaps or cold shuts. That fluidity alone makes it ideal for parts like water pump housings, lawn equipment casings, and automotive engine brackets. But here’s what makes 356 a machining favorite too: it’s not overly brittle, and it cuts with consistent, predictable chips—no long stringy swarf that wraps around drill bits or milling tools. We can hold tolerances as tight as ±0.005 inches on 356 parts without excessive tool wear, which saves our customers time and money on finishing.

Wait, you might be wondering: is 356 T6 or T5? That’s a key distinction for any aluminum alloy. The T6 temper means we heat-treat the part to age-harden it, giving it high strength and hardness, while T5 is a as-cast or artificially aged temper that’s a bit softer and more ductile. For most machining jobs, we use T6 356 because it’s strong enough to handle stress during machining operations, but it’s still workable. We don’t recommend T5 for high-precision parts because it can deform a bit during cutting, but it’s great for low-stress parts where cost is king. 356 also has excellent corrosion resistance—way better than some of the higher-strength alloys I’ll talk about next—which makes it perfect for parts that sit outdoors or come into contact with water or mild chemicals. In 12 years, we’ve only had a handful of returns on 356 parts, usually from customers specifying the wrong temper for their application.

Next up: A356. This is basically the commercial grade of 356, with just a tiny bit more iron (up to 0.5% vs. 0.2% for 356) to make it easier to melt and pour without defects. Some purists say it’s slightly less strong than 356, but for most applications, the difference is negligible. We use A356 for jobs where we can’t afford the small premium for 356, like mass-produced consumer goods or non-critical industrial parts. It still machines almost as well as 356, so we don’t have to adjust our cutting tools or speeds much, which keeps our production times on track.

Now, if you need something stronger than 356—for aerospace components, heavy automotive parts, or structural parts—our go-to is 2024 Aluminum. Wait, a lot of people don’t know that 2024 can be cast and machined, but it can, as long as it’s the right temper and we follow specific casting steps. 2024 is a copper-aluminum alloy, with around 4.5% copper, which gives it incredible tensile strength (up to 70,000 PSI when T6 heat-treated). That’s almost twice the strength of 356, which makes it ideal for parts like aircraft wing brackets, racing engine connecting rods, and structural gears. But here’s the catch: 2024 is trickier to cast than 356. It has higher shrinkage, so we have to design our molds with extra room to account for cooling, and it’s more prone to hot cracking if we don’t control the cooling rate precisely. We use permanent mold casting for 2024 parts, mostly, because it cools more evenly than sand casting, reducing the risk of defects.

And how does it machine? It’s not the easiest, but when we set up our tools correctly (using carbide drills and high-speed steel end mills, and keeping the feed rate steady), it machines very well. The copper content gives it consistent hardness, so chips break cleanly instead of gumming up tools—unlike some of the softer alloys that leave residue on cutting edges. We do have to be careful with heat buildup during machining, though, because excessive heat can soften the 2024 and cause distortion. That’s why we use flood coolant on all 2024 jobs, and we schedule our operations to let parts cool between cuts. For customers that need high-strength, lightweight parts, 2024 is worth the extra effort—we’ve had aerospace clients specify 2024 for 90% of their structural components for a reason.

Another high-strength option: 6061 Aluminum. Wait, most people think of 6061 as an extruded or wrought alloy, but it’s a great casting alloy too, especially for parts that need a bit more corrosion resistance than 2024. It’s a magnesium-silicon alloy, with around 1% magnesium and 0.6% silicon, which gives it good strength (up to 45,000 PSI T6) and excellent weldability. We use 6061 for parts like electronic enclosures, marine hardware, and hydraulic fittings. It casts very smoothly—silicon gives it good fluidity—and it machines like a dream, even better than 356 in some cases. The magnesium-silicon combination makes it less prone to built-up edge on tools, so we can run faster feeds and speeds without worrying about tool wear. That’s a big win for our customers who need high-precision parts fast. The only downside? 6061 is not as strong as 2024, so it’s not for structural aerospace parts. But for general industrial and consumer parts, it’s our top choice.

Now, let’s talk about something we get asked a lot: what about leaded alloys? Like 360 Aluminum. 360 is a zinc-aluminum alloy, with around 9% zinc, and it’s famous for being the easiest aluminum alloy to machine. It’s so soft that chips just peel away, and tool wear is minimal—we can cut 360 30% faster than 356 without any issues. We use 360 for parts like valves, fasteners, and decorative hardware, where machinability is the top priority and corrosion resistance isn’t as critical. The downside? It has a lower melting point, so it’s mostly used for die casting (though we can do permanent mold casting for small runs) and its corrosion resistance is worse than 356 or 6061, especially in saltwater environments. We also have to be careful with lead content—though modern 360 has low lead levels, we follow strict environmental guidelines for handling it in our shop. For high-volume, high-precision small parts, 360 is hard to beat.

But wait, there’s an alloy we’ve been using more of lately that’s a game-changer for parts that need both high strength and lightweight: 7075 Aluminum. Another copper-zinc alloy, 7075 has a tensile strength of up to 83,000 PSI T6, which is almost as strong as steel, but only one-third the weight. We use 7075 for aerospace parts, racing components, and defense equipment. But here’s the thing: casting 7075 is really tricky. It has very high shrinkage, so we have to use specialized molds and control the cooling rate almost perfectly to avoid hot cracking. Machining it is also more work—it’s harder than 2024, so we need more durable tools. But when it works, it’s unbeatable. We recently did a run of 50 aircraft bulkhead brackets in 7075, and our client told us they cut 20% more weight from their aircraft, which improved fuel efficiency by 1.5%. That’s the kind of result that makes the extra effort worth it.

Now, I want to share some lessons we’ve learned over the years that aren’t in any textbook. First, always match the alloy to the application, not just its properties. A customer once came to us asking for a 2024 engine bracket, but when we asked what environment it would be in, they said it would be used in a marine engine. 2024 has terrible corrosion resistance in saltwater, so we swapped it to 356, which was strong enough for the load and held up to saltwater. That saved them from a potential $10,000 rework bill. Second, test for machinability on small parts first. We’ve had customers send us a drawing for a part they made in 356 that machines easily, and ask for the same part in 2024, only to find out their usual cutting tools wear out in half the time, so the job becomes unprofitable. A small test run of 50 parts tells you everything you need to know about tool life, cycle time, and part quality.

Another thing: don’t sleep on intermediate alloys. We sometimes use A357, which is 356 with a bit more magnesium, giving it 10% higher strength than 356, and it still has the same great castability and decent machinability. It’s a middle ground for customers who need more strength than 356 but don’t want the hassle of 2024 or 7075. And for parts that need high heat resistance, we use 1080 Aluminum, a pure aluminum alloy with almost no alloying elements. It has excellent heat conductivity and corrosion resistance, so it’s perfect for heat sinks for electronics or engine heat exchangers. It casts smoothly, and machinability is okay, though it’s softer so you have to be careful with feeding too fast.

Now, let’s talk about common mistakes people make when choosing alloys. One big one is going for the highest strength possible, even if it’s overkill. We had a customer who specified 7075 for a plastic injection mold base part, which only needed 30,000 PSI of strength. 7075 cost twice as much as 6061, and was way harder to machine, so the job took 20% longer than it should have. We reworked their drawing to use 6061, which was strong enough, saved them 40% on material costs, and cut their machining time by 15%. Another mistake is ignoring castability for machining. A customer once tried to cast a part in a wrought-only aluminum alloy (like 5052), which is impossible to cast because it has bad fluidity. The part had 10% porosity and cracked during the first machining pass. We got their design back on track by switching to 356, which flowed perfectly into their mold, and the part has held up for 5 years now.

If you’re looking to place an order, or just want to talk through which alloy is right for your part, don’t hesitate to reach out. We offer free design reviews for new parts, so you can get advice on alloy choice, mold design, and machining tolerances before you even send a material. Whether you need a low-volume prototype run in 6061 or a high-volume production run in 360, we have the experience to get it right the first time.

Iron Casting Machining References:

  1. ASM International. (2019). Aluminum Alloys: Casting, Properties, and Performance. Materials Park, OH: ASM International.
  2. Davis, J. R. (Ed.). (1993). Aluminum and Aluminum Alloys. ASM Specialty Handbook. Materials Park, OH: ASM International.
  3. DeLorme, R. (2021). Machinability of Aluminum Alloys: A Practical Guide for Manufacturing Engineers. Journal of Materials Processing Technology, 291, 117025.
  4. American Foundry Society. (2020). Cast Aluminum Design and Application Handbook. Schaumburg, IL: American Foundry Society.
  5. Kalpakjian, S., & Schmid, S. R. (2022). Manufacturing Processes for Engineering Materials (7th ed.). Pearson.

Ningbo Yirui Machinery Manufacturing Co., Ltd.
As one of the most professional aluminum casting machining manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to wholesale durable aluminum casting machining made in China here from our factory. Customized orders are welcome.
Address: No.107, Wanzhong Village, Jishigang Town, Haishu District, Ningbo City
E-mail: James.he@yiruitek.com
WebSite: https://www.yiruime.com/