{"id":653,"date":"2026-11-10T06:03:25","date_gmt":"2026-11-09T22:03:25","guid":{"rendered":"http:\/\/www.ybsseatgroup.com\/blog\/?p=653"},"modified":"2026-11-10T06:03:25","modified_gmt":"2026-11-09T22:03:25","slug":"what-is-the-sealing-performance-evaluation-of-a-can-sealing-machine-4ed8-d330d0","status":"publish","type":"post","link":"http:\/\/www.ybsseatgroup.com\/blog\/2026\/11\/10\/what-is-the-sealing-performance-evaluation-of-a-can-sealing-machine-4ed8-d330d0\/","title":{"rendered":"What is the sealing performance evaluation of a can sealing machine?"},"content":{"rendered":"<p>If you\u2019re a brand owner running a canned food or beverage line, or a packaging engineer prepping a new product launch, you know a can sealing machine isn\u2019t just a \u201cmetal press that crimps a lid on.\u201d Bad sealing means lost product, food safety risks, and upset customers who pop a can to find flat soda, oozing soup, or that weird \u201coff\u201d taste from oxygen getting in. As someone who\u2019s been selling and supporting can sealing machines for years (I\u2019m on the ops side of a packaging equipment supply company, so I\u2019m not just some sales guy reading off a spec sheet), I get how confusing sealing performance can feel when every machine claims to be \u201chigh-quality\u201d or \u201c100% leak-proof.\u201d Today, let\u2019s break down exactly what sealing performance evaluation actually is, why it matters, and how we test our machines to make sure they don\u2019t let you down. <a href=\"https:\/\/www.fillingauto.com\/capping-machine\/can-sealing-machine\/\">Can Sealing Machine<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.fillingauto.com\/uploads\/202335981\/small\/single-column-coordinate-palletizer8563455c-014a-4d15-8f50-da8c493318cf.jpg\"><\/p>\n<p>First, let\u2019s start with the basics: what even is a good can seal? When you run a can sealing machine, it\u2019s doing two quick, precise steps: first, it tucks the flat lid\u2019s edge over the can\u2019s rolled double seam, then it crimps that seam tight so there\u2019s zero gaps. A good double seam (that\u2019s the official name for the seal) is like a lock: two layers of can metal, two layers of lid metal, and a rubber compound (the \u201csealant\u201d glued to the lid) sandwiched in the middle. If that seam is off even 0.1mm, you\u2019ve got a problem. That\u2019s where sealing performance evaluation comes in \u2013 it\u2019s the process of checking that your machine is crimping that seam perfectly, every single time, and that the seal holds up during storage, shipping, and even when a customer cracks it open.<\/p>\n<p>I\u2019ve seen so many folks skip the evaluation process and just run a new machine for a week, only to find half their cans leak during a warehouse test. Don\u2019t do that. There are four core tests we use every day to evaluate our sealing machines, and they\u2019re the same ones we recommend all our customers use too, no matter what brand of machine you end up buying. Let\u2019s go through them one by one.<\/p>\n<p>First up: the visual seam inspection test. This is the easiest first step, and anyone can do it, no fancy lab gear needed. When a can comes out of the sealing machine, you get a quick look at the seam. A good seam should be uniform all the way around the can \u2013 no lumps, no gaps that you can spot with the naked eye, and the lid should sit perfectly flat, no dips or uneven edges. But here\u2019s the thing: naked eye only catches big issues. Our techs use a simple seam micrometer (it\u2019s like a tiny ruler for metal parts, super cheap) to measure four key dimensions: body hook, cover hook, thickness, and compression. Body hook is how much of the can\u2019s top edge folded up, cover hook is how much the lid\u2019s edge folded down, thickness is how compact the whole seam is, and compression is how tight the rubber sealant is squeezed between the two metal layers. If your machine\u2019s seam micrometer shows the body hook is too short, for example, the lid won\u2019t lock on right. Too long, and you\u2019ll waste metal. We test 50 cans every time we do a machine setup \u2013 not just 5 random ones. Why? Because even a tiny alignment shift (like a misaligned roller head, which happens sometimes when you swap can sizes) will mess up 1 out of 10, and you\u2019ll have a whole batch of bad seals.<\/p>\n<p>Second test: leak testing. This is the big one for food and beverage brands, because a leaky seal is a food safety nightmare and a waste of product. There are two main leak tests we use, depending on what you\u2019re packing. First, the vacuum decay test. For this, you seal cans, put them in a sealed chamber, suck the air out until the chamber pressure is 29.9 inHg (that\u2019s the standard for sealed cans), and measure how much air seeps into the can over 2 minutes. A good seal will have almost no air seepage \u2013 like less than 0.5 cc per minute. If the number goes higher, you\u2019ve got a gap. The other test we use for solid goods (like canned veggies or pet food) is the water immersion test. You take sealed cans, submerge them in warm water, and spray 10 PSI of air at the bottom of the can. If you see bubbles, you\u2019ve got a leak. Super simple, and you can do it in a backyard or warehouse, no lab needed. We\u2019ve had customers tell us they used to lose 5% of their canned tuna to leaks before switching to our machines, and after testing with this method, that number dropped to 0.2%. That\u2019s the difference a proper sealing evaluation makes.<\/p>\n<p>Third test: torque resistance. This is how you check if the seal is tight enough to stay closed during shipping and handling. If your cans are getting stacked on pallets, loaded into trucks, and bounced around during cross-country shipping, you need a seal that doesn\u2019t twist open or loosen. Torque testing uses a simple torque wrench \u2013 you clamp the can\u2019s body, put a socket on the lid, and twist it. A good seal should resist 15-20 Nm of torque for most standard 12oz and 16oz cans, and 25 Nm for larger 24oz cans. If your seal breaks at less than that, you\u2019ll get lids popping off in transit, and that\u2019s a mess \u2013 not just lost product, but damaged packaging, and maybe even food safety issues if dirt gets in. We test this by taking 10 cans from a production run, testing each one, and if even one fails, we go back and adjust the sealing machine\u2019s roller pressure. I\u2019ve seen machines that look great on visual inspection fail torque test all the time \u2013 that\u2019s why this test is non-negotiable.<\/p>\n<p>Fourth test: shelf life simulation. This is the long-term test that tells you if the seal will hold up over months in a warehouse or on a grocery store shelf. For this, we seal cans, store them in a controlled environment (usually 75\u00b0F and 50% humidity, which mimics average retail storage), and test them at 1, 3, 6, and 12 months. We check for two main things: oxidation (for beverages, this means the soda goes flat, or the canned fruit gets that \u201ccardboard\u201d taste from oxygen seeping in) and seal degradation (like the rubber sealant breaking down, leading to leaks). Last year, we had a craft soda brand come to us because their cans were going flat after 2 months on shelves. Their machine\u2019s sealing evaluation only included visual and leak tests, so they never caught that the seam compression was too low \u2013 over time, the rubber sealant shrank, letting oxygen in. We adjusted our machine\u2019s roller crimping depth, and their shelf life jumped to 6 months, which is exactly what their retailers required. That\u2019s the kind of issue that only comes out of long-term shelf testing.<\/p>\n<p>Now, let\u2019s talk about how we integrate sealing performance evaluation into our machines, because that\u2019s what sets us apart from other suppliers. A lot of cheap machines skip in-process checks \u2013 they crimp the lid and move on. Our machines have built-in seam sensors that check every can\u2019s seam right after it\u2019s sealed, so if a can is off spec, it automatically rejects it (we call them \u201creject stations\u201d) and flags the issue. No more wasting product, no more sorting bad cans by hand. We also give every customer a free 2-hour training session on sealing performance evaluation, so you don\u2019t have to rely on us to test your machines. We walk you through how to use the seam micrometer, do the leak tests, and adjust the roller pressure if something\u2019s off. Last quarter, we trained a craft cookie brand out of Portland, and they told us after that, they only had to reject 0.1% of their cans, compared to 3% before when they were using a different machine and doing no testing.<\/p>\n<p>Wait, I know what some of you are thinking: \u201cI\u2019m running a small business, do I really need all these tests?\u201d Let\u2019s be real \u2013 if you\u2019re packing 100 cans a week for a farmers market, you can skip the formal shelf life test. But even then, you should do the visual check and a quick water immersion test, because a bad seam will leak before the week is out. If you\u2019re a brand packing 10,000 cans a month for regional retailers, you need the torque and leak tests, minimum. And if you\u2019re scaling up to 100,000 a month for national distribution, you need the full four-test evaluation, including shelf life simulation. It\u2019s all about matching the test to your business size and needs.<\/p>\n<p>Another common mistake I see: people confusing \u201csealing performance\u201d with just machine speed. Some buyers think a machine that runs 100 cans a minute is better than one that runs 50. But speed means nothing if the seals are bad. I\u2019ve seen high-speed machines that have a 2% seal failure rate, which is way worse than a slower, lower-speed machine with a 0.1% failure rate. Sealing performance is about consistency, not speed. That\u2019s why when we evaluate our machines, we test them at their maximum speed and at half speed, to make sure the seal holds up at both. A lot of competitors only test at max speed, which is where they cut corners to get more cycles per minute \u2013 but that\u2019s a mistake for you, the buyer.<\/p>\n<p>So, how do you know if your current sealing machine is performing well, or if you need to upgrade? Let\u2019s recap the red flags: if you\u2019re rejecting more than 1% of cans, if customers are complaining about flat soda or oozing soup, if lids are popping off during shipping, or if your shelf life is shorter than your competitors\u2019 \u2013 that\u2019s a sign your sealing performance evaluation is lacking, or your machine isn\u2019t calibrated right.<\/p>\n<p>At the end of the day, a can sealing machine is only as good as its seals. It\u2019s not just about crimping a lid; it\u2019s about protecting your product, your brand, and your customers. If you\u2019re evaluating new machines, or want to improve the sealing performance of your current setup, don\u2019t just go for the cheapest option, or the one with the flashiest specs. Ask the supplier about their sealing testing process, what kind of evaluation tools they provide, and how they help you troubleshoot issues when they come up.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.fillingauto.com\/uploads\/35981\/small\/automatic-sticker-labeling-machine771e7.png\"><\/p>\n<p>If you\u2019re ready to talk through your specific needs \u2013 whether you\u2019re a small craft brand just starting out, or a large CPG looking to cut seal failure rates \u2013 reach out to work through your sealing performance evaluation together. We\u2019re here to make sure your cans seal right, every single time.<\/p>\n<p><a href=\"https:\/\/www.fillingauto.com\/carton-packing-machine\/full-automatic-drop-packing-machine\/\">Full Automatic Drop Packing Machine<\/a> References<\/p>\n<ol>\n<li>Food and Drug Administration (FDA). (2022). Canned Food Sealing and Seal Performance Testing. U.S. Department of Health and Human Services.<\/li>\n<li>Packaging Machinery Manufacturers Institute (PMMI). (2021). Standard Test Methods for Double Seam Evaluation in Metal Canning Equipment. PMMI Media Group.<\/li>\n<li>Singh, R. P., &amp; Heldman, D. R. (2020). Sealing Technology in Food Packaging: Performance Evaluation and Quality Control. Journal of Food Engineering, 289, 110245.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.fillingauto.com\/\">Shandong Filling Auto Automation Equipment Co., Ltd.<\/a><br \/>Shandong Filling Auto Automation Equipment Co., Ltd. is one of the most professional can sealing machine manufacturers and suppliers in China, featured by quality products and competitive price. Please rest assured to buy high-grade can sealing machine for sale here from our factory. Also, customized service is available.<br \/>Address: Rongsheng Plaza\uff0cLicheng District, Jinan City, Shandong Province, China<br \/>E-mail: Info@fillingauto.com<br \/>WebSite: <a href=\"https:\/\/www.fillingauto.com\/\">https:\/\/www.fillingauto.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019re a brand owner running a canned food or beverage line, or a packaging engineer &hellip; <a title=\"What is the sealing performance evaluation of a can sealing machine?\" class=\"hm-read-more\" href=\"http:\/\/www.ybsseatgroup.com\/blog\/2026\/11\/10\/what-is-the-sealing-performance-evaluation-of-a-can-sealing-machine-4ed8-d330d0\/\"><span class=\"screen-reader-text\">What is the sealing performance evaluation of a can sealing machine?<\/span>Read more<\/a><\/p>\n","protected":false},"author":356,"featured_media":653,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[616],"class_list":["post-653","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-can-sealing-machine-4c4e-d3db6c"],"_links":{"self":[{"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/posts\/653","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/users\/356"}],"replies":[{"embeddable":true,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/comments?post=653"}],"version-history":[{"count":0,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/posts\/653\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/posts\/653"}],"wp:attachment":[{"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/media?parent=653"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/categories?post=653"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.ybsseatgroup.com\/blog\/wp-json\/wp\/v2\/tags?post=653"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}